802540 3.7V 900mAh Lithium Battery for Sena 10S Series Sena 10S-01 and Sena 20s Series Sena 20s-01 Sena 20s Evo Sena 30K Sena 30K-01D Motorcycles Bluetooth Headset Battery Replacement Intercom
Price:4249
MRP:4249
0
Check Your Exact Savings on Amazon
Continue to Amazon
Good PriceBelow average.
Current
4,249
Lowest₹2,139
Typical₹5,345
Highest₹5,490
- ★ Compatible: Sena 10S series, Sena 10S-01, Sena 20s series, Sena 20s-01, Sena 20s evo, Sena 30K series, Sena 30K-01D. It can also be used in other electronic 3.7-5 V products with a power of less than 3.33 Wh (900 mAh).
- ★ Rechargeable lithium-ion polymer battery 802540, rated voltage 3.7 V, full charging voltage 4.2 V, capacity 900 mAh, power 3.33 Wh, size 1.574 x 0.984 x 0.236 inches (40 × 25 × 8 mm) (L x W x D), weight: 0.59 ounces. (16,8) g) , Maximum current: 1 A. It can prevent overcharging, over-discharge, over-current and short circuit.
- ★ It consists of a large capacity A+ lithium battery, Japanese Seiko IC overcharge and over-current short circuit protection board, high temperature resistant silicone cable 3302-26 and original 2-pin JST pitch 1.0mm connection module.
- ★ The red cable is the positive electrode "+" and the black cable is the negative pole "-"。 For some products, the original battery has no plug or the plug does not match. It doesn't matter. You can cut and weld the connector directly or use our heat shrinkable insulation sleeve to connect the wires of the same colour.
- ★ If there is a quality problem within one year, please contact us at any time by email and replace it for free.
- ★ Compatible: Sena 10S series, Sena 10S-01, Sena 20s series, Sena 20s-01, Sena 20s evo, Sena 30K series, Sena 30K-01D. It can also be used in other electronic 3.7-5 V products with a power of less than 3.33 Wh (900 mAh).
- ★ Rechargeable lithium-ion polymer battery 802540, rated voltage 3.7 V, full charging voltage 4.2 V, capacity 900 mAh, power 3.33 Wh, size 1.574 x 0.984 x 0.236 inches (40 × 25 × 8 mm) (L x W x D), weight: 0.59 ounces. (16,8) g) , Maximum current: 1 A. It can prevent overcharging, over-discharge, over-current and short circuit.
- ★ It consists of a large capacity A+ lithium battery, Japanese Seiko IC overcharge and over-current short circuit protection board, high temperature resistant silicone cable 3302-26 and original 2-pin JST pitch 1.0mm connection module.
- ★ The red cable is the positive electrode "+" and the black cable is the negative pole "-"。 For some products, the original battery has no plug or the plug does not match. It doesn't matter. You can cut and weld the connector directly or use our heat shrinkable insulation sleeve to connect the wires of the same colour.
- ★ If there is a quality problem within one year, please contact us at any time by email and replace it for free.
